[contaygious]

Here's a pic Jason sent me.

Just posting for anyone that cares......

grrrrr pic not uploading hold up

 

[PINITI]

If It's Not Here, then No, it's not available from his supplier/source. http://superiordash.com/product.php?par ... oline_id=1 Jason B is simply a distributor for this manufacturing co. & He is Also a Moderator at another site, who Pushes his products and Stifles talk of any other Competing product. I believe he still Pushes Injen CAI too. (and we all know how that flopped) Just letting you know, he's only in it for the Money. Try here also > http://www.nycdashes.com/cart/customer/ ... 393&page=1 OR Here > http://www.sherwooddash.com/materialtypes.htm

 

[dmei]

Isn't this what you're looking for?
http://www.burtmanindustries.com/zoompr ... actory_mtc

 

[contaygious]

yup! That's the one, just posting a pic since there isn't one on that site. 215 is a great deal if u ask me. course i need the fx first :lol:

Thought I would share the pic for those considering.

It has the cutouts, but there is no other matching silver one so...

I think the FX should come like this already. looks good to me.

 

[hombogero]

That looks hot, I'm gonna buy it! So I take that you just stick it on right? Anyone here install these things before? Not a real fan of the wood kits, but the aluminum has me sold.

 

[krzys4]

Hmmm... I have mixed feelings about this. One one side it looks nice but on the other it might make the interior look too cheesy. I guess I would have to see it in person.
hombogero, you're in chicago, right? Let me know if you do decide to install it. Thanks

 

[hombogero]

I emailed Jason, and he is going to send me samples of the kit. I want to see how close they match. Im only going to do the center, and vents. I dont want to over do it.

 

[PINITI]

Isn't this what you're looking for?
http://www.burtmanindustries.com/zoompr ... actory_mtc

Interesting 1st post dmei? :? Where are you from? This looks like the Exact Same > http://superiordash.com/uploads/classic ... INC028.jpg < Notice where It's From! ~ Look at the RBA (Real Brushed Alum.) at the bottom of this page ( $200 SHIPPED ! :shock: 29 pieces ! ) > http://www.nycdashes.com/cart/customer/ ... 393&page=1

 

[hombogero]

So which one would you guys go with? I going to ask for a sample of the NYC dash. They have allot of pieces and probably will not use them all, and the price is cheaper. Please let me know what you guys think.

 

[PINITI]

For $200 SHIPPED :lol: That's a No Brainer!

:shock: Lots of Choices Too!

 

[ShadyJC]

I asked NYCDashes for a sample about a month or two ago (and even paid $1 for it) but it never came. You're right, somehow they're cheaper, but don't want to blow the money without seeing the product first.

 

[ShadyJC]

BTW there is an aluminum dash kit on ebay right now going for $140, BuyItNow
http://cgi.ebay.com/ebaymotors/ws/eBayI ... gory=33705

 

[dmei]

Yep, this is my first post, but I've been reading discussions on this forum for months, even before I actually purchased my FX35 2 months ago.

I've been doing researches on a good quality wood dash trim. I've heard a lot of good feedbacks on Burtman's kit. I did try the Superior dash's route as you suggested but they quoted me 30% more than Jason. So if I decide to go with Superior's kit, I will definitely get from Jason.

I've also requested samples from NYC dash, but was told to wait 7-10 days for couple pieces of wood chips :? I like their patterns best but I'm also worry about their quality since I had a really bad experience with "cheap" wood dash trims, which I got from Ebay for my old Honda!

By the way, I am from Long Island...

Interesting 1st post dmei? :? Where are you from? This looks like the Exact Same > http://superiordash.com/uploads/classic ... INC028.jpg < Notice where It's From! ~ Look at the RBA (Real Brushed Alum.) at the bottom of this page ( $200 SHIPPED ! :shock: 29 pieces ! ) > http://www.nycdashes.com/cart/customer/ ... 393&page=1

 

[PINITI]

Sorry to mislead you. :roll: THIS is my BEST/1st choice http://sherwooddash.com With the CI - uncoated brushed metal http://www.sherwooddash.com/materialtypes.htm

 

[contaygious]

no doubt, pinti's wood is the ish! Especially around the clock. very nice! Too bad the same place does not offer a matching oem silver kit without the cutouts.

If that 200 dollar matching OEM kit is really MATCHING then that would be my first choice.

 

[PINITI]

no doubt, pinti's wood is the ish! Especially around the clock. very nice! Too bad the same place does not offer a matching oem silver kit without the cutouts.

If that 200 dollar matching OEM kit is really MATCHING then that would be my first choice.

I Have No Idea what you are talking about. :? Sherwooddash makes the Same kit I have IN Brushed Alum. WITH Factory Re-Labeling. :roll: It doesn't get Any Easier! (1-800-286-1674)

Life is Easy, Why make it Hard?? :shock: http://sherwooddash.com/

 

[contaygious]

oh snap ! I didn't realize the brushed aluminum was the same as OEM.

My bad! good lookin! 8)

Someone has to get it and post pics!
Anyone interested?

 

[hombogero]

I am so close to getting this kit, just waiting on a couple of email replies.

 

[hombogero]

Anyone notice that the mute button is covered on the posted pic up top?

 

[FXLENT]

As well as the left side trim piece on the radio looks like sh!T.