Infiniti FX Forum banner

1 - 20 of 40 Posts

·
Registered
Joined
·
29 Posts
Discussion Starter #3
i just sold my 2006 4runner made about $1500 off of it...

what you should i do next:
1. finish my front BBK kit
2. fix/replace 3 door lock actuators?
 

·
Premium Member
Joined
·
1,698 Posts
I would fix the door locks first then move on to modifications.
 

·
Registered
Joined
·
29 Posts
Discussion Starter #7

·
Registered
Joined
·
29 Posts
Discussion Starter #9
Where to get these?
THIS IS WHAT YOU WILL NEED

FROM THESE VEHICLES: G37S/FX50S/M37S/Q70S (SPORT MODELS)

1. Akebono calipers

2. Brake Rotors

3. STOPTECH stainless steel Braided Brake lines Part # 950.42012

4. 25mm wheel spacers
 

·
Registered
Joined
·
3 Posts
this is what you will need

from these vehicles: G37s/fx50s/m37s/q70s (sport models)

1. Akebono calipers

2. Brake rotors

3. Stoptech stainless steel braided brake lines part # 950.42012

4. 25mm wheel spacers
thanks little confusing, can you link them up if you have a time, i dont want to make mistake when i order them :d

i liked the infiniti look so probably, i should go with any of these g37s/fx50s/m37s/q70s

25mm spacers i got it right!

Stoptech's are in the basket too.
 

·
Registered
Joined
·
29 Posts

·
Premium Member
Joined
·
1,698 Posts
Nice. Clear tails was a very popular mod back in the day. The other work that you are planning sounds good too.
 

·
Premium Member
Joined
·
1,698 Posts
Very nice but now you are going to have to do the rears. they look old when compared to those beautiful fronts.
 

·
Registered
Joined
·
29 Posts
Discussion Starter #19
Very nice but now you are going to have to do the rears. they look old when compared to those beautiful fronts.
one day maybe... it's a lot of work and $$ for the rears.. we'll see.. maybe ill just get a set of cross drilled and slotted rotors and a nice set of pads for the rears...
 

·
Premium Member
Joined
·
1,698 Posts
Some nice rotors might match the fronts pretty well.
 
1 - 20 of 40 Posts
Top