Infiniti FX Forum banner

Intake Question

2K views 4 replies 4 participants last post by  mushutofu 
#1 ·
I read on a 350Z forum that one guy installed an Injen Upper tube and a JWT pop charger.

Does anyone know if you can buy just the upper piece? It would be a nice set up with the olished tube instaed of the plastic Z tube
 
#2 ·
You can do that but you still need the 'accordian' piece or get the same diameter alum tube cut and extend it, it's too short
 
#3 ·
I don't think you can buy that piece by itself. The plastic Z yube is better for performance, anyway; less heat soak. Looks pretty, though.
 
#4 ·
if Injen could've only read this when they designed, they would not have made that bend , away from factory front air sources / food for thought on sat. - customize!
 
#5 ·
With the right saw you can easily hack off a piece of the tube. When you buy an AEM CAI and want to install a bypass valve you need to cut the pipe. All you need to do is wrap tabe around the tube where you are going to saw ans use a hack saw. It cuts very easily.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top