In-Cabin Air Filter Install w/pics
1 - 20 of 50 Posts
Joined
·
5,363 Posts
Yes, Four screws in a row as seen in pic 3 and 1 screw near where the passengers left foot would be, by the vent as seen in pic 4.
Behind the glovebox there is a white plastic door that opens from the right and is removed to insert the filter then the door is replaced.
Behind the glovebox there is a white plastic door that opens from the right and is removed to insert the filter then the door is replaced.
okay-
mine's in::
observations??
1) you HAVTA unplug two connections to get the filter in, without crunching it up......
2) EVEN THOUGH I CANT READ JAPANESE (DIRECTIONS ARE NON-ENGLISH), I was able to put the foam strips on each solid end of the filter , so............. now............. which way do you install said filter??? i went foamy end in..........
3) not sure how well it works....... on my way back from the gym, i could STILL smell krispy kreme's factory making donuts....... (they even had the 'fresh' light on....)-- not a good place to visit post-workout...lol
mine's in::
observations??
1) you HAVTA unplug two connections to get the filter in, without crunching it up......
2) EVEN THOUGH I CANT READ JAPANESE (DIRECTIONS ARE NON-ENGLISH), I was able to put the foam strips on each solid end of the filter , so............. now............. which way do you install said filter??? i went foamy end in..........
3) not sure how well it works....... on my way back from the gym, i could STILL smell krispy kreme's factory making donuts....... (they even had the 'fresh' light on....)-- not a good place to visit post-workout...lol
Joined
·
2,480 Posts
Are you kidding? If not, what the heck did you do that required removing it? :?:
Joined
·
5,363 Posts
well... ok i put the foamy thingies on the left and right...
and put the filter in so i could read nissan lookin in at it
i.e. top side up :?
i did not remove any wires but i did remove the clip holding the harness to the back of the glove box at the top of my last pic.
Dose anyone know if the yellow wires are for the air bag :?:
and put the filter in so i could read nissan lookin in at it
i.e. top side up :?
i did not remove any wires but i did remove the clip holding the harness to the back of the glove box at the top of my last pic.
Dose anyone know if the yellow wires are for the air bag :?:
THOUGHT THE SAME MYSELF....Sweet Fx said:
started my car up, and the airbag light went out, so id guess no....
is your light on??
ps- i put the foam on the closed edges, per the pic on the instructions (covers the nissan text)
am i wrong, or does it not matter??
WE NEED a 2k4 owner to check and see...
also, let us know which way the dang thing is designed to fit.. (definately a right and wrong there..imo)
hey TJ!!
Just finished this 5 minutes ago. On my '04 45 there is a sixth screw under the kick panel. After taking the other 5 out, the glove box basically fell out when I removed the sixth.
Oh yeah, make sure you have your pliers handy to release the yellow connector from the glove box. You will also have to disconnect a little white connector (just a little snap type connector).
Oh yeah, make sure you have your pliers handy to release the yellow connector from the glove box. You will also have to disconnect a little white connector (just a little snap type connector).
I just put in one on my 2003 FX45. There were a total of 6 screws. I had to remove the trim on the door sill and toward the right of the feet area to get to that 6th screw.
I did not break any trim tabs, like I did so often with Fords, nice. Broken trim tabs suck. No more dust storms blowing into the cabin, woohoo.
I did not break any trim tabs, like I did so often with Fords, nice. Broken trim tabs suck. No more dust storms blowing into the cabin, woohoo.
1 - 20 of 50 Posts
