Infiniti FX Forum banner
1 - 9 of 9 Posts

·
Registered
infiniti fx 50 s 2009
Joined
·
5 Posts
Discussion Starter · #1 ·
Dear All thanks for accepting me in the below forum and all the best.

I am a new user of an infiniti fx 50 S but i have a little problem please help me to know where to find. I just change the V8 engine and the car spark and stops 30 seconds after. Noway to accelerate

Need your opinions

Regards,
 

·
Registered
Joined
·
102 Posts
There must be a lot of codes popping up. Can you get the car scanned with a OBDii reader?
 

·
Registered
infiniti fx 50 s 2009
Joined
·
5 Posts
Discussion Starter · #3 ·
YES I WILL SCAN THE CAR BACK AND SEND YOU THE CODES THANKS IN ADVANCE
 

·
Registered
Joined
·
102 Posts
Double check all of the ground wire connections. Make sure that none were missed during the engine swap. Could also be an ECM problem but start with grounds first.
 

·
Registered
infiniti fx 50 s 2009
Joined
·
5 Posts
Discussion Starter · #6 ·
Thanks one's again Denis but are you talking about ground wire connections inside the car i mean in the interior or ground connections in the engine compartment?

Regards,
Eric
 

·
Registered
Joined
·
102 Posts
Also, double check all of the connections coming from the ECU into the engine bay. Basically, anything that was disconnected during the engine swap.
 
1 - 9 of 9 Posts
Top