Infiniti FX Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
56 Posts
Discussion Starter #1
I'm curious about how difficult it is to replace or adjust the belts on an fx35? It seems it might be a bit involved based on this thread, but not too bad?:
http://www.infinitifx.org/20-write-ups/18059-writeup-changing-belts-fx45.html

Has anyone on here done it? If so how long did it take? Did you need any special tools?

Lastly, does anyone have the .pdf file or write up referred to in this thread? the links are no longer working.

Thanks
 

·
Premium Member
Joined
·
10,995 Posts
Pretty easy on the V6... There should be a page on how to do it in the FSM... Have you downloaded a copy yet?
 

·
Registered
Joined
·
56 Posts
Discussion Starter #3
Pretty easy on the V6... There should be a page on how to do it in the FSM... Have you downloaded a copy yet?
FSM = Factory Service Manual? No only the owner's manual. Can you share the link to download the FSM please?

I still have only seen the engine on one car, the FX35, a couple of weeks ago. So I don't recall readily seeing the drivebelts. Are they covered by plastic? Will you have to remove anything to adjust or replace them?
 
1 - 3 of 3 Posts
Top